Chev-Tech LLC   

Blok-Lok™ is a superior water repellent designed to protect exterior vertical surfaces in the harshest of climates with a 100% active and unique blend of silane/siloxanes and exclusive Micro-Lok formulation.

Rainguard's Waterproofer Standard 7 Year provides homeowners with excellent protection against water, salt and weathering with a seven year satisfaction guarantee.

Rainguard Wet Look Sealer enhances and rejuvenates surface color, and beautifies with a high gloss, “wet look” finish. Ideal for porches, patios, decks, walkways, stone pavers, fencing and retaining walls.

6009 Nova Bar Commercial & Industrial Floor Coating





A 100% solids, advanced technology of diglycidyl ether of bisphenol-A resin reacted with a modified multiple ring cycloaliphatic amine activator. The resulting polymer structure is extremely tough with very good chemical resistance to general industrial conditions.

The Nova Bar 6009 product is also used for general floor coating where appearance and abrasion resistance is important. Nova Bar 6009 is resistant to amine blush and water spotting. Packaging is in convenient pre-measured kits. The mix ratio is 2A:1B with a cure suitable for access later in the day or the next day. Nova Bar 6009 is an attractive epoxy floor coating designed to provide penetration, wetting and sealing of substrates and surfaces for improved appearance and protection.It is formulated to be hard, durable, impact and abrasion resistant. The primary use of this 2:1 ratio product system is for industrial floor coatings show room floors, coating garage floors and general work areas.

Advantages

• Protective Attractive Color Coat Epoxy Flooring System
• Designed To Seal Floors Against Abrasion, Water, Oils And Chemicals
• Good Color Stability

Preparation

Concrete must have a minimum 28 day cure prior to application. Remove any curing agent, form release materials, oils, wax, moisture or any material that may effect bonding. *Perform a Moisture Vapor Test before making the coating application on concrete

• Clean substrate by dry diamond grinding to open the concrete surface
• Provide rough profile minimum 2 Mils.
• Review ASTM D4259 Abrading Concrete and ASTM F1869 Measuring Moisture Vapor Emission.
• Repair all bug-holes, cracks and spalls, see ASTC data sheets on 830, 4034 and 3004 (joints).
• Do not apply 6009 to floors that have not been properly prepared or that do not have a pH of 7-8.5.
• Remove all old coatings.